|
-
All
season tread
-
High
tech tread design
-
Nostalgic bias-ply look
-
Actual whitewall molded into the tire.
-
US DOT
and ECE approved for the U.S. and Europe.
-
13 to 16
inch diameters
-
All
14 & 15" tires are tubeless.
-
16"
tires require tubes.
-
Polyester cord/Steel belts
-
Recommended PSI: 35 on 14 & 15" tires.
-
16" radials require 41 PSI.
-
Raised
curb guard design.
-
Note on
photos to the right:
Tire and whitewall sizes are approximate and
are offered as an example of how the tire generally appears.
-
Wire wheels available at www.hobbycar.com
|
A - 75
Series
Click on tire for
larger photo
D - 550R16
Click on tire for
larger photo
|
B - 16 Inch
Click on tire for
larger photo
E - 750R16
Click on tire for
larger photo
|
C - 14
inch 75 Series
Click on tire for
larger photo
F -
165R15
Click on tire for
larger photo
|
Coker Classic Nostalgia Radial
Specifications and Information
All tires are
Poly/Steel Construction
Please click
on the Buy Button to see our prices
|
|
One Price Tires
Prices Shown Include Shipping Charges
No Hidden Fees or Trick Charges
Continental US Only |
|
|
Size |
White Wall
Width |
Recommended
Rim Width |
Load
Capacity |
Tread Width |
Section
Width |
Overall Diameter |
Load/Speed Index |
Shopping Cart
Buy It Now |
P195/75R14
Photo C |
2.25" |
5 - 7" |
1400 @ 35 PSI |
5.48" |
7.96" |
25.51" |
92P |
 |
|
P205/75R14
Photo C |
2.375" |
5.5 - 7.5" |
1532 @
35PSI |
5.68" |
8.14" |
26.11" |
97P |
|
|
P215/75R14
Photo C |
2.50" |
5.5 - 7.5" |
1664 @
35 PSI |
5.68" |
8.25" |
27.11" |
100P |
|
|
P225/75R14
Photo C |
2.5" |
6 - 8" |
1797 @
35 PSI |
6.04" |
8.78" |
27.62" |
102P |
|
165R15
Photo F |
2.25" |
4.5 - 6" |
1168 @ 35 PSI |
4.62" |
6.50" |
25.25 |
86S |
|
185R15
Click here for photo |
3/8"
Redline |
5 - 6.5" |
1355 @ 35 PSI |
4.75" |
7.28" |
27.00" |
91S |
|
|
P205/75R15
Photo A |
2.375" |
5.5 - 7.5" |
1598 @ 35 PSI |
5.68" |
8.14" |
27.11" |
97P |
|
P215/75R15
Photo A |
2.5" |
5.5 - 7.5" |
1742 @ 35 PSI |
6.04" |
8.63" |
27.62" |
100P |
|
P225/75R15
Photo A |
2.75" |
6 - 8" |
1874 @ 35PSI |
6.24" |
8.95" |
28.29" |
102P |
|
P235/75R15
Photo A |
3.125" |
6 - 8.5" |
2028 @ 35 PSI |
6.58" |
9.41" |
28.91" |
105P |
|
550R16
TUBE
REQUIRED
Photo D |
2.75" |
3.25 - 4" |
1355 @ 41 PSI |
4.53" |
5.25" |
26.88" |
91P |
|
550R16
TUBE
REQUIRED
Photo D |
Blackwall |
3.25 - 4" |
1355 @ 41 PSI |
4.53" |
5.25" |
26.88" |
91P |
|
600R16
TUBE
REQUIRED
Photo E |
3" |
4 - 5" |
1520 @ 41 PSI |
5.00" |
6.25" |
28.36" |
95P |
|
600R16
TUBE
REQUIRED
Photo E |
Blackwall |
4 - 5" |
1520 @ 41 PSI |
5.00" |
6.25" |
28.36" |
95P |
|
650R16
TUBE
REQUIRED
Photo E |
3.25" |
4 - 5" |
1710 @ 41 PSI |
5.40" |
6.80" |
29.26" |
99P |
|
650R16
TUBE
REQUIRED
Photo E |
Blackwall |
4 -5" |
1710 @ 41 PSI |
5.40" |
6.80" |
29.26" |
99P |
|
700R16
TUBE
REQUIRED
Photo E |
3.50" |
4 - 5" |
1875 @ 41 PSI |
5.85" |
7.35" |
30.18" |
102P |
|
700R16
TUBE
REQUIRED
Photo E |
Blackwall |
4 - 5" |
1875 @ 41 PSI |
5.85" |
7.35" |
30.18" |
102P |
|
750R16
TUBE
REQUIRED
Photo E |
4.00" |
5 - 6" |
2150 @ 41 PSI |
6.40" |
8.00" |
31.14" |
107P |
|
750R16
TUBE
REQUIRED
Photo E |
Blackwall |
5 -6" |
2150 @ 41 PSI |
6.40" |
8.00" |
31.14" |
107P |
|
*Please order your tires
carefully. Let us help you. If you need to return tires and it
is not our fault, there is a 20% re-stocking fee.
Tires must be
returned in the same condition as shipped and not mounted. We
cannot accept tires that have been mounted.
Shipping costs are
the responsibility of the customer.
If you run inner-tubes
with your tires, it is imperative that you carefully inspect and
remove all stickers on the inside of the tires. We have found as
many as six inspection stickers. They are not always easy to
remove. We have used a hair dryer to loosen them up. If you do
not remove these stickers, they can puncture your inner-tubes
and cause a flat tire which could be a safety-hazard.
Please
call us if you have any questions on this important issue.
|
IMPORTANT
INFORMATION!
-
If you run
inner-tubes with your tires, it is imperative
that you carefully inspect and remove all
stickers on the inside of the tires. We have
found as many as six inspection stickers. They
are not always easy to remove. We have used a
hair dryer to loosen them up. If you do not
remove these stickers, they can puncture your
inner-tubes and cause a flat tire which could be
a safety-hazard. Please call us if you have any
questions on this important issue.
-
Coker Classic Nostalgia radial tires are designed
for pre-1976 vehicles and have modern aspect
ratios, so interchangeability is not implied nor
always possible because of rim widths, wheel
well clearance and speed and load ratings
required.
-
It is very important to maintain proper
inflation pressure (35 psi MINIMUM) on Coker
Classic Nostalgia radial tires. 16" tires
require 41 psi.
-
Vehicles designed for bias ply tires may drive
considerably different with radial ply tires.
Please use extreme caution.
-
Older rims that were originally designed for
bias-ply tires may crack if used with modern
radial tires. Please use caution by inspecting
your rims on a regular basis.
-
Never mix bias and radial tires on the same
vehicle. Your vehicle may over or under-steer,
causing you to lose control of your vehicle.
-
Thank you.
|
*Please order your tires
carefully. Let us help you. If you need to return tires and it
is not our fault, there is a 20% re-stocking fee.
Tires must be
returned in the same condition as shipped and not mounted. We
cannot accept tires that have been mounted.
Shipping costs are
the responsibility of the customer.
- Coker Steel Belted
Radial Details
-
Construction: Polyester cord with steel
belts
- All 14 and
15 inch Coker Classic Nostalgia radial tires are tubeless.
16 inch tires require tubes.
- All sizes
are both DOT and ECE marked. ECE is the
certification for the European market.
- UTQG:
15" Tread wear: 400. 16" tires: 350. Traction B, represents the
tire's ability to stop on wet pavement.
Temperature: B, represents the tire's
resistance to the generation of heat and its
ability to dissipate heat. Load range: C.
- Approximate
mileage: 35,000 - 40,000. Note: this is an estimate,
not a warranty.
- Recommended
PSI for 14 and 15" tires: 35 PSI. 16"
tires: 41 PSI. Low air pressure can cause the
sidewall to crack or lead to tire failure.
-
Mounting/Balancing Recommendations: Static
balance with the weights on the inside of
the tire only in order to protect the soft
whitewall. This also gives a more pleasing
appearance. Recommend the use of lug centric
balancing over hub centric. Due to the
cosmetic whitewall insert these tires may
take 3 to 5 ounces to balance, this is
normal.
- 75 series
feature an all season tread design.
- The whitewalls, redlines and redlines
are molded into the tire, not added on after
the tires are made.
- Caution:
When converting a bias to a radial, the 75
series will be closer to the 78 or 80 series bias
size. Going larger may result in fitment
issues on some applications, especially when
using fender skirts.
- All listed
measurements are non-scientific and may
change with different rim widths.
- Never mix
bias and radials on the same vehicle because
the vehicle may steer uncontrollably.
- Old rims can
often be out-of-round and should be
carefully checked before mounting.
- Not
for commercial use.
- Older rims
designed for bias-ply tires may crack if
used with modern radials, as the radial
places more stress on the wheel.
|
|
friendly advice is
a phone call or email away 9/4/2022 |
Motorspot,
Inc.
427 Industrial Way, Unit
C - Fallbrook, California
92028
Telephone:
760-731-8301 (Phone calls returned)
Monday through Friday 9 - 5 PST
email |
Return to the home page
|
|
